To obtain a ‘L’ configuration with F/G arms use SG-F1-G1-ARMS together with 2 pieces
of SG-CB-C.
Please install F1 arm on RX unit and G1 arm on TX in order to have them facing one to
another.
To obtain a ‘T’ configuration with F/G arms use SG-F1-G1-ARMS and SG-F2-G2-ARMS
together with 2 pieces of SG-CB-C.
Please install F1 and F2 arms on RX unit and G1 and G2 arms on TX in order to have
them facing one to another.
To Next Page
Loading...