Datalogic Applications
User’s Manual 133
Silent Install
This option allows to perform an image update that does not require
any user interaction on the device. If cleared, the user will be
prompted to perform the update, but has the option to cancel the
update. This check box is not selected by default.
Force Update
This option allows you perform a full upgrade of the firmware
regardless of what is installed on the device. By default, the
firmware upgrade utility will compare the version of the image file
with what is already running on the device, and if they match it will
skip updating. This is done to save time and prevent inconveniences
for most users in the field. However, in rare circumstances a
firmware image can become corrupted in the field, and this option
allows a DXU administrator to perform a full firmware upgrade,
disregarding the version reported by the device.
Factory Data Reset After Installing Firmware
A factory data reset is a full reset of the device intended to return it
to factory defaults. This reset deletes all user data, settings and
installed applications, and resets the device’s real-time clock to its
default date and time. Data on microSD cards is not affected.
Enterprise Reset After Installing Firmware
An enterprise reset is much like a factory data reset, except that it
does not reset network connections (such as Wi-Fi settings),
custom desktop wallpaper graphics and splash screen graphics. In
every other way, it resets the device, including restoring flash
memory to factory defaults, removing installed applications,
deleting user data, and resetting the date and time to default levels.
To Next Page
Loading...
Need help?
General