Settings
User’s Manual 63
Security Type: WPA2-Personal
In case of pre-shared key (PSK) authentication, the access point
sends an unencrypted challenge text string to any device that is
attempting to communicate with the access point. The device that is
requesting authentication encrypts the challenge text and sends it
back to the access point. If the challenge text is encrypted correctly,
the access point allows the requesting device to authenticate.
To create a profile with PSK authentication, follow the steps below:
1. Select the Security Type as WPA2-Personal
2. Select the Encryption Type
3. Enter the password in the Security Key field.
To Next Page
Loading...
Need help?
General