4 H-Class
External Media Rewinders
Precision-crafted, bi-directional rewinding mechanisms with device-dependant features:
DMXREW1 - accommodates 1 to 4-inch (25 to 101 mm) diameter cores, accepts a
maximum label width of 4.5 inches (114 mm), and rewinds to an 8-inch (203 mm)
maximum outer diameter at 10 inches per second.
DMXREW2 - accommodates 3-inch (76 mm) diameter cores, accepts a maximum
label width of 9.5 inches (241 mm), and rewinds to a 12-inch (304 mm) maximum
outer diameter at 30 inches per second.
ILPC Fonts
Font sets that allow International Language Print Capability, consisting of one of the
following:
CG-Times (western European) Scalable font
Kanji Gothic B Scalable font
Simplified Chinese GB Scalable font
Korean Hangul font
Internal Rewinder, Power-Assisted (Standard models only)
An internal mechanism to wind printed labels, or backing material when using a Peel and
Present option, into a maximum outer diameter roll of five and half inches (139 mm).
Internal Rewinder, Powered "Full Roll" (Tall models only)
A motorized internal mechanism to wind printed labels, or pull the backing material when
using a Peel and Present option, into to a maximum outer diameter roll of eight inches (203
mm).
Linear Scanner (H-4xxx and H-4xxxX models only)
A CCD scanning device with data capture and integrated label voiding features to ensure the
integrity of printed bar codes.
Media Cutter
A rotary-type device that cuts material with a maximum thickness of .01 inch (.254 mm)
into lengths as small as 1.25 inches (31.8 mm).
Peel and Present Mechanism, High Performance
(H-4xxx and H-4xxxX models only, Internal Rewind optional)
An output regulator that automatically separates die-cut labels from the backing material
and inhibits printing when a label is presented. (Minimum label length is 1.5 inches [38
mm]).
To Next Page
Loading...
Need help?
General