H-Class 5
Peel and Present Mechanism, Standard (Internal Rewind required)
A plate-style output regulator that automatically separates die-cut labels from the backing
material and inhibits printing when a label is presented. (Minimum label length is 1.5 inches
[38 mm]).
Present Sensor
An output regulator that inhibits printing when a label is presented.
RFID (All models except H-8308X)
An integrated Ultra High Frequency (UHF) RFID encoding and reading device with data
capture, available in three different configurations:
Factory Installed - complete, ready to use from the factory.
Ready - factory installed antenna, requiring the installation of an RFID module and
hardware.
Full Upgrade - antenna, RFID module, and hardware require installation.
SDIO Interface and USB Host Ports (H-4xxx models only)
An interface that accepts external memory storage devices for fonts, graphics, label
formats, and firmware; as well as a port that can accept a USB keyboard for direct data
input applications (e.g., Line Mode).
Thermal Transfer
A hub assembly that allows printing with ribbon for exceptional image clarity and durability,
as compared to most direct thermal media types.
Option Installation
The table below lists the experience needed to install the options described above. For more
information, contact your dealer or Datamax.
Option Installation
Option Recommended Installer
40 mm Media Hub Factory only
Cover Dampener DMX Certified Technician
External Media Rewinder Operator
Graphics Display DMX Certified Technician
ILPC Fonts DMX Certified Technician
Internal Rewinder Operator
Linear Scanner DMX Certified Technician
Media Cutter Operator
To Next Page
Loading...
Need help?
General