S-Class 61
Ticket Stock Requirements
Type
[1]
:
Fan-fold
(and roll, if option equipped)
reflective
[2]
or continuous direct thermal stock.
Roll Stock
[1]
(media sensor
dependant):
Print Side Media Sensor –
Standard Media Sensor –
TOF Marks wound facing ‘out.’
TOF Marks wound facing ‘in.’
Thickness Range:
Standard Model –
Cutter-Equipped Model –
.005-inch minimum to a .010-inch maximum.
.005-inch minimum to a .008-inch maximum.
1
The ST Model has space restrictions when ticket stock is stored internally, see
‘Mechanical / Ticket Compartment,’ above.
2
The mark must be black carbon-based ink, with a reflectance that is less than 10% at
wavelengths of 950 and 640 nm.
To Next Page
Loading...
