Datavideo HS-1600T User Manual

76
Blinking Red
Record function is
activating or resetting
Stream function is
activating or resetting
Record/Stream functions
are activating or resetting
simultaneously
Solid Red
Record function activated
Stream function
activated
Record/Stream functions
are activated
simultaneously
Record Button
Press the RECORD button to start/stop recording.
Start recording
 When idle, the RECORD button is solid white.
 Press and hold the RECORD button for approximately 2 seconds.
 When the record function is activating, the RECORD button turns from solid white, then
blinking red and finally to solid red.
 When the RECORD button is solid red, this indicates that the record function has been
successfully activated.
Note: The RECORD button is disabled in the Stream Only mode.
Stop recording
 While recording, the RECORD button is solid red.
 Press and hold the RECORD button for approximately 2 seconds.
 When the record function is terminating, the RECORD button turns from solid red, then
blinking red and finally to solid white.
 When the RECORD button is solid white, this indicates that the record function has been
successfully terminated.
Stream Button
Press the STREAM button to start/stop streaming.
Start streaming
 When idle, the STREAM button is solid white.
 Press and hold the STREAM button for approximately 2 seconds.
 When the stream function is activating, the STREAM button turns from solid white, then
blinking red and finally to solid red.
 When the STREAM button is solid red, this indicates that the record function has been
successfully activated.
Note: The STREAM button is disabled in the Record Only mode.
Stop streaming
 While streaming, the STREAM button is solid red.
 Press and hold the STREAM button for approximately 2 seconds.
 When the stream function is terminating, the STREAM button turns from solid red, then
blinking red and finally to solid white.

Datavideo HS-1600T Specifications

General

Brand	Datavideo
Model	HS-1600T
Category	Switch
Language	English