86
After the connection is done, please make sure that your iCAST 10 NDI, PTZ
cameras and TPC-700 or TPC-700P are set in the same IP range for controlling
your iCAST 10 NDI by the TPC-700 or TPC-700P. In the following section, we
will introduce the user interface of the ZR-1 app for you.
13.2 ZR-1 Main Interface
After all connections are done, please press the ZR-1 app icon from your TPC-
700 or TPC-700P to enter its main interface. This chapter will take the ZR-1 app
version 1.0.9 as an example. There are two modes in the ZR-1 app user
interface including the “3 cams” mode and the “2 cams” mode. Please follow
the steps below to enter the main interface.
1. Please tap the ZR-1 app icon .
2. Please press the “Admin” button. After that, please press the “Apply” button.
3. You will see a keypad, please enter the default administration password.
Default Password: admin
After that, please press the “OK” button to enter the ZR-1 app interface.
To Next Page
Loading...
