Datavideo TPC-700P User Manual

22
 How to install App
1. Please download App file for your product model from Datavideo
official website https://www.datavideo.com. The file name is “SE-3200
firmware for TPC-700P_V2.2.10.zip” (Take SE-3200 as an example).
2. Please unzip the downloaded zip file. After that, please unzip the
“product model name_vx.x.x.zip” and then you will see a “datavideo”
file folder with “tpc700.apkg” file in it. Please copy the whole
“datavideo” file folder into the root directory of your USB flash drive.
3. Please insert the USB flash drive into the USB interface which is
located at the left side of the TPC-700/TPC-700P controller.
4. Please press the “Install” button which is located at the top-right
side of the “App Manage” interface and then the App will be installed
automatically.
 Autorun last App ON/OFF toggle switch: If this toggle switch is
“ON”, for the next time when the TPC-700 or the TPC-700P is
turned on, it will run the app which is operated for the last time
automatically.

Datavideo TPC-700P Specifications

General

Brand	Datavideo
Model	TPC-700P
Category	Controller
Language	English