EasyManua.ls Logo

DCS 954 - User Manual

DCS 954
89 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 1997, 1999, 2000 dCS
Ltd
All rights reserved. Reproduction of this manual in any manner whatsoever,
without the written permission of dCS
1
is strictly forbidden. Additional copies of
this manual may be obtained from dCS.
Information contained in this manual is subject to change without notice, and
whilst it is checked for accuracy, no liabilities can be accepted for errors.
1
dCS
Ltd is Data Conversion Systems Ltd. Company registered in England, UK, no. 2072115
dCS 954
Digital to Analogue Converter
User Manual
Standard software version 1.5x
P3D software version 1.36
June 2000

Table of Contents

Questions and Answers

  • M
    michaelmercadoSep 12, 2025
    Why does DCS 954 Media Converter fail to respond to controls?
    • B
      Brenda WilsonSep 12, 2025
      If your DCS Media Converter unit fails to respond to the controls, it may be because the microcontroller inside the unit is busy locking to a source or changing some settings. In this case, it will not respond to new commands for a few seconds. Short mains supply drop-outs may cause the microcontroller to lock up; switch off the unit, wait 10 seconds, then switch it on again. The Remote Control disables the front panel controls.
  • T
    Travis ChavezSep 14, 2025
    How to fix display turning on and off quickly on DCS Media Converter?
    • R
      Rachel McdonaldSep 14, 2025
      If the Display turns on briefly when a button is pressed on your DCS Media Converter, then turns off, set the 7-Seg menu item to On.

DCS 954 Specifications

General IconGeneral
CategoryMedia Converter
Fiber ModeMulti-mode
ModelDCS-954
StandardsIEEE 802.3u 100BASE-TX/FX
Copper InterfaceRJ-45
Fiber InterfaceSC
Operating Temperature0°C to 50°C
Storage Temperature-10 to 70 °C (14 to 158 °F)
Humidity5% to 90% non-condensing

Related product manuals