Fig. 12 Attaching the furling lines (lazy-jacks)
Attaching the boom
Fitting the main-drop sailcover
Fit the boom on the gooseneck with the aid
of a crewmember and secure it with the
bolt. The topping lift is fastened to the eye
on end of the boom by a knot and the boom
is hauled into a horizontal by tensioning the
topping lift at the mast.
The mainsheet is routed partly through the
boom, and for this reason is secured on the
boom. The diagram on Page 14 shows how
the mainsheet line is routed. The Halyard
routing diagram on Page 16 shows the
routing of the mainsheet to the starboard
coaming winch.
Fig. 13 shows how the kicking strap is
attached, and the diagram on Page 16
shows how it is routed back to the cockpit.
Fig. 13 Boom kicking strap
Insert the boom cover for the main-drop
system into the grooves on the boom, from
fore to aft. The wide end of the cover should
be at the mast end, with the zip on the
inside.
Insert the stiffening battens into the batten
pockets in the cover, from fore to aft.
Dehler 35 cws
13
https://www.boat-manuals.com/
To Next Page
Loading...
