Fig. 47 Gas Bottle below helmsman’s seat. Reserve
bottle is opposite
Anti-slip deck covering
The TBS deck covering is made of
polyurethane material containing granulates.
The covering offers a non-slip surface both in
wet and dry conditions and is comfortable to
walk or sit on, as well as providing sound
insulation and thermal insulation.
The inlaid deck covering is resistant to oil,
grease and diesel fuel, and can be scrubbed
lightly using any household cleaner or soapy
water. These agents should also be used if dry
crusts of brine form.
The granular material mixed into the
covering also sits on the surface and is not
bonded in. If a stiff brush is used on it
straight away, the deck panels will retain
their uniform appearance.
Dehler 35 cws
48
https://www.boat-manuals.com/
To Previous Page
Loading...
