No. 5 Skin fitting ¾“, cooling water
intake for engine with quick-
acting ball valve. To gain access
to the Skin fitting, pull out and lift
the soundproof engine casing.
No. 6 Skin fitting ¾“, seawater intake
for toilet with quick-acting ball
valve.
No. 7 Skin fitting 1 ¼”, toilet or effluent
tank outlet with quick-acting ball
valve.
No. 8 Skin fitting ¾“, effluent tank vent.
No. 9 Skin fitting ¾“, electric bilge pump
No 10. Skin fitting ¾“, manual bilge
pump.
No. 11 Skin fitting 2”, exhaust outlet.
No. 12 Skin fitting ¾“, cockpit drain outlet
for steering wheel well.
Fig. 35. Valves
Electrical System
Battery capacity
Battery capacity varies according to
specification of fit-out.
We have provided separate starter battery
and domestic batteries. Please carefully
read the battery manufacturer’s instructions
on handling.
Always close valves 3, 4, 5, 6 and 7 located
below the waterline, if leaving the boat for
any length of time. Don’t forget to re-open
the engine cooling water valve (No. 5)
before starting the engine to move the boat.
34
https://www.boat-manuals.com/