Deif GPC-3 - Setup Example for Parameter Change

Setup structure
SEL
BACK
SEL
BACK
SP DEL OA OB ENA FC
1000 G -P> 1
Set point -5.0%
G 400 400 400V
SYNC REG
CONTROL SETUP
SYNCHRONISE SETUP
G 400 400 400V
BIN AIN OUT
INPUT/OUTPUT SETUP
BINARY INPUT SETUP
G 400 400 400V
GEN MAINS COMM PM
SYSTEM SETUP
GENERAL SETUP
G 400 400 400V
f-L1 50.00HZ
SYSTEM SETUP
G 400 400 400V
PROT CTRL I/O SYST
f-L1 50.00HZ
INPUT/OUTPUT SETUP
G 400 400 400V
PROT CTRL I/O SYSTPROT CTRL I/O SYST
G 400 400 400V
f-L1 50.00HZ
CONTROL SETUP
PROT CTRL I/O SYST
G 400 400 400V
f-L1 50.00HZ
PROTECTION SETUP
2010-01-02 09.35.54
SETUP V3 V2 V1
PPU V.3.50.0
SEL
BACK
SEL
BACK
SEL
BACK
Setup example
The following example illustrates how a specific setting is changed in the setup menu. In this case, Reverse
power is the selected parameter.
First entry
Increase no.
Decrease no.
Increase setting
Decrease setting
Moves the cursor
YES
NO
PROT CTRL I/O SYST
G 439 440 440V
G f-L1 50.02HZ
PROTECTION SETUP
SP DEL OA OB ENA FC
1000 G -P> 1
Set point -5.0%
G 439 440 440V
SP DEL OA OB ENA FC
1010 G -P> 2
Set point -5.0%
G 439 440 440V
ENTER
Enter passw. 1999
G 439 440 440V
RESET SAVE
1001 G -P> 1
-50.0 -5.0 0.0%
G 439 440 440V
BACK
SEL
BACK
SEL
ML-2 operators manual 4189340579 UK Menu systems and structure
DEIF A/S Page 17 of 29