6. Parameter setup
6.1 Procedures for setup
The complete parameter list is presented in the separate Parameter List document of the Multi-
line unit in question: GPC/GPC Gas/GPC Hydro/GPU Hydro document number 4189340580,
GPU/GPU Gas/PPU document number 4189340581.
This chapter deals with the procedure to be followed when the parameters of the unit are set up from the
initial point of finding the individual parameter description to the actual setup. By use of various illustrations,
the following will guide the user through the whole procedure of parameter setup step by step.
6.2 Finding the selected parameter
The first step in the parameter setup is to find the correct parameter descriptions. All parameter descriptions
in the Parameter List document are intended for reference purposes. The descriptions are structured accord-
ing to their parameter titles and the main parameter group to which they belong.
6.3 Parameter descriptions
In the parameter list, each parameter description is structured according to the same principles. Under the
parameter title heading, the detailed parameter descriptions are illustrated and presented. First, a table indi-
cating the parameter facts related to the individual parameter title is presented:
Due to the character of the parameters there may be small differences between the individual
tables.
The first column indicates the menu number in the display.
The second column indicates the name of the setting.
ML-2 operators manual 4189340579 UK
Parameter setup
DEIF A/S Page 28 of 29
To Next Page
Loading...
