The logs can be viewed in the display or in the PC utility software. When the individual logs are full, each new
event will overwrite the oldest event according to the “first in – first out” principle.
Display
When the LOG push-button is pressed, the display looks like this:
Paralleling and Protection Unit
multi-line PPU
EVENT LOG
EVENT ALARM BATT.
G 400 400 400V
LOG SETUP
Now it is possible to select one of the three logs.
If EVENT is selected, the log will look like this:
Paralleling and Protection Unit
multi-line PPU
2010-01-02 18:54:28.8
INFO FIRST LAST
G 400 400 400V
Ack. alarm
The specific alarm or event is shown in the second line, and the time stamp is shown in the third line.
ML-2 operators manual 4189340579 UK Alarm handling and log list
DEIF A/S Page 24 of 29
To Next Page
Loading...
