4.3 Terminal details
Rear view of the controller with terminal details.
Terminal Text Description Connector
1 GND Power ground
BCP-508-10GN
2 BATT + Power supply positive
3 DIG OUT A DC output - A
4 DIG OUT B DC output - B
5 DIG OUT C DC output - C
6 DIG OUT D DC output - D
7 DIG OUT E DC output - E
8 DIG OUT F DC output - F
9 DIG OUT G DC output - G
10 D+ CHG ALT Input for charging alternator control
11 ANLG LOP / DIG J
Analogue input from Lube Oil Pressure Sensor/
Digital Input J
BCP-508-6GN
12 ANLG FUEL LEVEL / DIG K
Analogue input from Fuel Level Sensor/Digital
Input K
13 ANLG ENG TEMP / DIG L
Analogue input from Engine Temperature Sensor/
Digital Input L
14 ANLG AUX 1 / DIG M
Analogue input auxiliary/Analogue input from
Shelter Temperature Sensor/Digital Input M
15 ANLG AUX 2 / DIG N Analogue input auxiliary/Digital Input N
16 SCP Sensor common point
USER MANUAL 4189341227A UK Page 16 of 86
To Next Page
Loading...
