5. Monitoring mode
5.1 Monitoring mode
In Monitoring mode, the display views shift automatically after a pre-defined time. This delay time can be configured in the
configuration menu.
The views can also be changed manually with the Up and Down buttons.
Engine status and operating mode
Product info Manual mode Auto mode
Auto - Site mode Auto - Cyclic mode Auto - Exercise mode
Generator voltage Genset power factor Mains healthy
Mains run time Load apparent power*
Load power*
Load current* Load reactive power* Generator cumulative energy
Mains cumulative energy Engine lube oil pressure Engine fuel level
USER MANUAL 4189341227A UK Page 20 of 86
To Next Page
Loading...
