Need help?Do you have a question about the Deliberant APC and is the answer not in the manual?
General| Data Rate | 300 Mbps |
|---|---|
| Operating Mode | Access Point, Client, WDS |
| Wireless Security | WPA2 |
| Power Method | Passive PoE |
| Antenna | Integrated antenna |
Essential networking knowledge required to effectively use the manual.
Glossary of technical abbreviations used throughout the document.
Step-by-step guide for the initial configuration of the Access Point.
Operates the device as a wireless network bridge connecting networks.
Operates the device as a router, sharing internet via WAN interface.
Overview of the main web management menu and its sections.
Explains how to apply and save configuration changes in the GUI.
Displays general status and network statistics of the device.
Configures network mode, IP settings, VLANs, and DHCP.
Configures wireless modes (AP, Station, WDS, iPoll) and settings.
Configures authentication and encryption methods for wireless links.
Configures alerts for system errors via SNMP or SMTP.
Manages device time, date, and remote monitoring.
Manages device settings, accounts, reboot, and factory reset.
Updates device firmware using a firmware file.
Tools for optimizing antenna placement and scanning networks.
Tests network reachability and packet path.
Analyzes signal levels on available frequencies/channels.
Web browser based user authentication and setup.
Controls user access to web content via lists.
Resets the device to its original factory configuration.
Lists supported RADIUS attributes and messages for authentication.
To Next Page
