EasyManua.ls Logo

Deliberant APC - RADIUS Attributes

Deliberant APC
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User’sGuide
deliberant Page64
B)RADIUSAttributes
The following RADIUS attributes and messages are supported by the DLB APC.
GeneralAttributes
Attribute Description
User-name (1) Full username as entered by the user.
User-Password (2) Used for UAM as alternative to CHAP-Password and CHAP-Challenge.
CHAP-Password (3) Used for UAM CHAP Authentication
CHAP-Challenge (60) Used for UAM CHAP Authentication
EAP-Message (79) Used for WPA Authentication
NAS-IP-Address (4)
IP address of Chilli (set by the nasip or radiuslisten option, and
otherwise "0.0.0.0")
Service-Type (6)
Set to Login (1) for normal authentication requests. The Access-Accept
message from the
radius server for configuration management messages must also be
set to Administrative-User.
Framed-IP-Address (8)
IP address of the user, which is configurable during MAC
authentication in the Access-Accept.
Filter-ID (11) Filter ID pass on to scripts possibly.
Reply-Message (18) Reason of reject if present.
State (24)
Sent to chilli in Access-Accept or Access-Challenge. Used
transparently in subsequent Access-Request.
Class (25)
Copied transparently by chilli from Access-Accept to Accounting-
Request.
Session-Timeout (27) Logout once session timeout is reached (seconds)
Idle-Timeout (28) Logout once idle timeout is reached (seconds)
alled-Station-ID (30) Set to the nasmac option or the MAC address of chilli.
Calling-Station-ID (31) MAC address of client
NAS-Identifier (32) Set to radiusnasid option if present.
Acct-Status-Type (40) 1=Start, 2=Stop, 3=Interim-Update
Acct-Input-Octets (42) Number of octets received from client.
Acct-Output-Octets (43) Number of octets transmitted to client.
Acct-Session-ID (44) Unique ID to link Access-Request and Accounting-Request messages.
Acct-Session-Time (46) Session duration in seconds.
Acct-Input-Packets (47) Number of packets received from client.
Acct-Output-Packets (48) Number of packets transmitted to client.
Acct-Terminate-Cause (49)
1=User-Request, 2=Lost-Carrier, 4=Idle-Timeout, 5=Session-Timeout,
11=NAS-Reboot
Acct-Input-Gigawords (52) Number of times the Acct-Input-Octets counter has wrapped around.
Acct-Output-Gigawords (53) Number of times the Acct-Output-Octets counter has wrapped around.
NAS-Port-Type (61) 19=Wireless-IEEE-802.11
Message-Authenticator (80)
Is always included in Access-Request. If present in Access-Accept,
Access-Challenge or

Table of Contents

Related product manuals