User’sGuide
deliberant Page59
SpectrumAnalyzer
The Spectrum analyzer test displays detailed information about signal level of each APC unit’s
antenna on each available frequency. This enables administrator choose the best available
frequency/channel for the unit operation. The frequency list depends on the Country at which the unit
is operating, and chosen channel width.
Do not use the Spectrum analyzer on the remote unit of the link, as the connection to the
device will be lost during the test.
Click Start button to perform the test:
Operating frequency range – displays the channel frequency range at which the APC unit is
operating currently.
Maximum – color indicates a the maximum achieved signal level on the appropriate frequency.
Current – color indicates the current signal level on the appropriate frequency.
Average – indicates average of the signal level on the appropriate frequency.
To Next Page
Loading...
