Deliberant APC - Wireless

User’sGuide 
deliberant Page19

IP address – displays the IP address of the particular interface.
MAC – displays the MAC address of the particular interface.
Received – displays the number of received packets.
RX errors – displays the number of the RX errors.
Transmitted – displays the number of transmitted packets.
TX errors – displays the number of the TX errors.
DHCP leases – table displays information about leased DHCP addresses. This table appears only on
AP which acts as Router and have DHCP server enabled.
Wireless
Status Wireless section is not available if APC is operating in Station wireless mode. In
this case all necessary information about wireless connection with AP unit will be under
Information section.