Deliberant APC - Wireless Mode: Ipoll Station; Basic Settings; Security Settings

User’sGuide 
deliberant Page41

WirelessMode:iPollStation
The iPoll Station is a wireless client mode which can connect to the iPoll Access Points.
Figure 37 – iPoll Station's Wireless Settings
BasicSettings
Use this section to setup basic operating settings of the iPoll Station radio.
iPoll Access Point and iPoll Station will operate in 802.11n IEEE mode only.
SSID – specify the SSID of the wireless network device manually, or use Scan functionality.
Scan – click this button to scan for surrounding iPoll Access Points. Found network SSID’s will be
available in drop down menu.
Channel width – The default channel bandwidth for 802.11 N radio is 20/40MHz. The 802.11n allow
channel bonding in such way the total channel width becomes 40MHz.
SecuritySettings
Both sides (iPoll Access Point and iPoll Station) of the link must have the same security
settings.
The APC device working, in iPoll Station wireless mode, supports authentication/encryption methods
listed below: