Figure 53. Removing the NVDIMM-N battery
Next steps
Install the NVDIMM-N battery.
Installing the NVDIMM-N battery
Prerequisites
Follow the safety guidelines listed in Safety instructions.
CAUTION: To prevent data loss, ensure that your system and LEDs on NVDIMM-N and NVDIMM-N battery are
turned off before removing the NVDIMM-N battery.
CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or
removing a battery.
Steps
Holding the edges, align the NVDIMM-N battery with the battery connector on the system board
Connect the cables to the NVDIMM-N battery.
Using the Phillips #2 screwdriver, tighten the screw to secure the NVDIMM-N battery.
Figure 54. Installing the NVDIMM-N battery
Next steps
Follow the procedure listed in After working inside your system.
Installing and removing system components 103
To Next Page
Loading...
