Figure 45. Inside the system - 3 PCIe expansion risers
1. right control panel cable cover 2. hard drive cage
3. backplane cover 4. backplane release latch
5. cabling latch 6. cooling fan (8)
7. air shroud 8. processor and DIMM blank
9. processor 2 slot 10. IDSDM/vFlash module slot
11. expansion riser 2 A 12. network daughter card
13. expansion riser 1 A 14. PCIe shroud
15. integrated storage controller card 16. processor 1
17. intrusion switch 18. cabling latch
19. hard drive backplane 20. left control panel cable cover
Air shroud
Removing the air shroud
Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
Follow the safety guidelines listed in Safety instructions.
Follow the procedure listed in Before working inside your system.
Steps
Hold the air shroud at both ends and lift it away from the system.
Installing and removing system components 89
To Next Page
Loading...
