Figure 46. Removing the air shroud
Next steps
If applicable, install the air shroud.
Follow the procedure listed in After working inside your system.
Installing the air shroud
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Follow the procedure listed in Before working inside your system.
If applicable, route the cables inside the system along the system wall and secure the cables by using the cable latch.
Steps
Align the tabs on the air shroud with the slots on the system.
Lower the air shroud into the system until it is firmly seated.
When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.
90 Installing and removing system components
To Next Page
Loading...
