Dell EMC PowerEdge R640 - Installing the M.2 SSD Module

Figure 79. Removing the M.2 SSD module
module connector (2)
screws (2)
module (2)
Next steps
Install the M.2 SSD module.
Installing the M.2 SSD module
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
Align the M.2 SSD module connectors with the connectors on the BOSS card.
Push the M.2 SSD module until the module is seated firmly on the BOSS card.
Secure the M.2 SSD module on the BOSS card with the retention straps and screws.
124 Installing and removing system components