Dell 2130CN - Page 155

Values:

Auto Registration Adjustment
Purpose:
To specify whether to automatically perform color registration adjustment.

Color Registration Adjustments
Purpose:
To specify whether to manually perform color registration adjustment.
Manual Color Registration Adjustments are required such as after the printer is moved.
Values:

Clean Developer
Purpose:
To clean each toner cartridge or PHD unit, or to stir toner in a new toner cartridge.
Values:

Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the
location where the printer is being used.

Reset Defaults
Plain
Sets the temperature settings for the fuser for plain paper within the range of -6 to 6.
Plain Thick
Sets the temperature settings for the fuser for thick plain paper within the range of -6 to 6.
Transparency
Sets the temperature settings for the fuser for transparencies within the range of -6 to 6.
Covers
Sets the temperature settings for the fuser for cover paper within the range of -6 to 6.
Covers Thick
Sets the temperature settings for the fuser for thick cover paper within the range of -6 to 6.
Label
Sets the temperature settings for the fuser for labels within the range of -6 to 6.
Coated
Sets the temperature settings for the fuser for coated paper within the range of -6 to 6.
Coated Thick
Sets the temperature settings for the fuser for thick coated paper within the range of -6 to 6.
Envelope
Sets the temperature settings for the fuser for envelopes within the range of -6 to 6.
Recycled
Sets the temperature settings for the fuser for recycled paper within the range of -6 to 6.
NOTE: The Color Registration Adjustments feature can be configured when Auto Registration Adjustment is set to Off.
Auto
Correct
Click Start to Automatically performs color registration correction.
Color Regi
Chart
Click Start to print a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart,
find the values on the right side that are next to the straightest lines for each of the three colors. If the value for the straightest line is 0, color
registration adjustment is not required. If the value for the straightest line is any value other than 0, specify the adjustment values under Color
Registration Adjustments.
Enter
Number
Specifies fast scan (perpendicular to paper feed direction) and slow scan (paper feed direction) color adjustment values individually for Yellow,
Magenta, and Cyan within the range of -9 to 9.
Clean Developer
Stirs toner in a new toner cartridge.
Yellow Toner Refresh
Cleans the toner in the yellow toner cartridge.
Magenta Toner Refresh
Cleans the toner in the magenta toner cartridge.
Cyan Toner Refresh
Cleans the toner in the cyan toner cartridge.
Black Toner Refresh
Cleans the toner in the black toner cartridge.
Drum Refresh
Cleans the surface of the PHD unit.
Downloaded from ManualsPrinter.com Manuals