Dell 2130CN - Initialize Printmeter; Tray Settings


Initialize PrintMeter
Purpose:
To initialize the printer's PrintMeter. Executing this function restarts the printer, and the value of the meter resets to 0.
Values:

Tray Settings
Purpose:
To specify the paper types and sizes for input trays respectively.
Values:
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings
Press the Restart printer to apply new settings button to apply the changes.
Initialize PrintMeter
Click Start to initialize the PrintMeter.
Tray 1 Paper Type
Plain*
Specifies the type of paper loaded in the standard 250-sheet tray.
Plain Thick
Covers
Covers Thick
Label
Recycled
Envelope
Plain S2*
1
Plain Thick S2*
1
Recycled S2*
1
Tray 1 Paper Size
A4 (210 x 297 mm)*
Specifies the size of paper loaded in the standard 250-sheet tray.
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x
10.5")
Monarch (3.875 x
7.5")
Monarch LEF (7.5 x
3.875")
DL (110 x 220 mm)
DL LEF (220 x 110
mm)
C5 (162 x 229 mm)
Envelope #10 (4.125
x 9.5")
Custom Size
Tray 1 Custom Size - Y
Specifies the length of custom size paper loaded in the standard 250-sheet tray. The available range is from 127 mm (5.0 in.) to
355 mm (14.0 in.).
Tray 1 Custom Size - X
Specifies the width of custom size paper loaded in the standard 250-sheet tray. The available range is from 77 mm (3.0 in.) to
215 mm (8.5 in.).
Tray 2 Paper Type*
2
Plain*
Specifies the type of paper loaded in the optional 250-sheet feeder.
Plain Thick
Recycled
Plain S2*
1
Plain Thick S2*
1
Recycled S2*
1
A4 (210 x 297 mm)*
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Downloaded from ManualsPrinter.com Manuals