Dell 2130CN - Page 157

items. If you want to change the settings, go to the pages in the Print Server Settings tab.
Values:
Ethernet
*1
Ethernet Settings
Displays the current settings of Ethernet transmission rate and the duplex settings.
Current Ethernet Settings
Displays the current Ethernet settings.
MAC Address
Displays the printer's MAC address.
Wireless
Settings
*2
SSID
Displays the name that identifies the network.
Network Type
Displays the network type from either the Ad-Hoc or Infrastructure mode.
MAC Address
Displays the MAC address of the wireless printer adapter.
Link Channel
Displays the channel number of the connection.
Link Quality
Displays the quality of the connection.
TCP/IP
Settings
IP Mode
Displays the IP mode.
Host Name
Displays the host name.
IPv4
IP Address Mode
Displays the IP address mode.
IP Address
Displays the IP address.
Subnet Mask
Displays the subnet mask.
Gateway Address
Displays the gateway address.
IPv6
Use Manual Address
Displays whether to set the IP address manually.
Manual Address
Displays the IP address.
Stateless Address 1-3
Displays the stateless addresses.
Link Local Address
Displays the link local address.
Manual Gateway Address
Displays the gateway address.
Auto Configure Gateway
Address
Displays the gateway address.
DNS
IPv4
Get DNS Server Address
from DHCP
Displays whether to automatically get a DNS (Domain Name System) server
address from the DHCP (Dynamic Host Configuration Protocol) server.
Current DNS Server
Address
Displays the DNS server address.
IPv6
Get DNS Server Address
from DHCPv6-lite
Displays whether to automatically get a DNS server address from the DHCPv6-
lite server.
Current DNS Server
Address
Displays the DNS server address.
Priority to IPv6 DNS Name
Resolution*
3
Displays whether to use the DNS Name Resolution feature.
LPD
Port Status
Displays the port status.
Connection Time-Out
Displays the connection timeout period.
Port9100
Port Status
Displays the port status.
Port Number
Displays the port number.
Connection Time-Out
Displays the connection timeout period.
WSD
*4
Port Status
Displays the WSD port status.
Port Number
Displays the WSD port number.
Receive Time-Out
Displays the receive timeout period.
Notification Time-Out
Displays the notification timeout period.
Maximum Number of TTL
Displays the maximum number of TTLs.
Maximum Number of
Notification
Displays the maximum number of notifications.
HTTP
Port Status
Displays the port status.
Port Number
Displays the port number.
Simultaneous Connections
Displays the number of connections received simultaneously by the client.
Connection Time-Out
Displays the connection timeout period.
SNMP
Port Status
Displays the port status.
Enable SNMP v1/v2c
Protocol*
4
Displays the status of the SNMP v1/v2c feature.
Enable SNMP v3 Protocol*
4
Displays the status of the SNMP v3 feature.
SSL/TLS*
4
HTTPS
Displays the HTTPS status.
Port Number
Displays the port number.
IPsec
Settings*
4
Protocol
Displays the protocol status.
IKE
Displays to use a pre shared key for IKE authentication.
IKE SA Lifetime
Displays the lifetime for IKE SA.
IPsec SA Lifetime
Displays the lifetime for IPsec SA.
DH Group
Displays the DH group.
PFS
Displays the PFS status.
Downloaded from ManualsPrinter.com Manuals