Dell 2200 - Assigning and Deleting an Asset Tag Number; Table 2-1. Asset Tag Command-Line Options

Using the Dell Server Assistant CD 2-3
Assigning and Deleting an Asset Tag
Number
An asset tag number can have up to ten characters; any
combination of characters, excluding spaces, is valid. To
assign or change an asset tag number, type asset and a
space followed by the new number; then press <Enter>.
For example, type the following command line and press
<Enter>:
asset 1234567890
When prompted to verify the asset tag number, type
y
and press <Enter>. The system then displays the new or
modified asset tag number and the service tag number.
To delete the asset tag number without assigning a new
one, type
asset /d
and press <Enter>.
Table 2-1 lists the command line options you can use
with the Asset Tag utility. To use one of these options,
type
asset
and a space followed by the option.
.
Table 2-1. Asset Tag Command-Line Options
Asset Tag Option Description
/d Deletes the asset tag number
/? Displays the Asset Tag
utility help screen