Dell 2200 - Chapter 7 Installing System Board Options; Figure 7-1. System Board Features

Installing System Board Options 7-1
Chapter 7
Installing System Board Options
T
his chapter describes installation of the following
options:
•
Extended Industry-Standard Architecture (EISA),
Industry-Standard Architecture (ISA), and Periph-
eral Component Interconnect (PCI) expansion cards
•
Dual in-line memory modules (DIMMs)
•
Microprocessor upgrade
This chapter also includes instructions for replacing the
system battery, if necessary.
Use Figure 7-1 to locate the system board features.
Figure 7-1. System Board Features
video
connector (JVGA)
battery socket
(BATTERY)
parallel port
connector
(PARALLEL)
serial port 1 (bottom)
and serial port 2 (top)
connectors (SERIAL)
keyboard (bottom)
and mouse (top)
connectors
(KYBD/MOUSE)
hard-disk drive access indicator
connector (HDLED)
EISA connectors
(EISA1 [bottom],
EISA2, and EISA3)
fan connector (FAN)
power input connector (POWER)
3-V power input connector
(POWER3V)
auxiliary fan connector
(AUXFAN)
PCI connectors (PCI4
[bottom], PCI5, and
PCI6)
server management
connector (SVR_MGT)
configuration jumpers
diskette controller
connector (FLOPPY)
integrated SCSI host adapter
connector (SCSI)
DIMM sockets (DIMM_A [top],
DIMM_B, DIMM_C, and DIMM_D)
primary microprocessor module
(PROC_1)
secondary microprocessor module
(PROC_2)
temperature sensor
connector (TEMP_2)
temperature sensor
connector (TEMP_1)
front-panel connector (PANEL)