Dell 2200 - Security Menu Categories; Figure 4-4. Security Menu of the System Setup Program

Using the System Setup Program 4-9
S
ecurity Menu Categories
To access the Security menu (see Figure 4-4), use the
arrow keys to highlight Security. This section explains in
detail each of the System Setup categories in the Security
menu.
Figure 4-4. Security Menu of the System Setup Program
Main Advanced Security Exit
Supervisor Password is: Disabled
User Password is: Disabled
Set Supervisor Password: [Press Enter]
Set User Password: [Press Enter]
Password on Boot: [Disabled]
Diskette Access: [User]
System Backup Reminder: [Disabled]
Virus Check Reminder: [Disabled]
Item-Specific Help
BIOS Version A XX
key functions
F1 Help Select Item -/+ Change Values F9 Setup Defaults
ESC Exit Select Menu Enter Select Submenu F10 Previous Values
Dell System PowerEdge 2200 Setup
Pressing <Enter> displays
a dialog box for entering
the supervisor (7-digit,
alphanumeric) password.
This password gives full
access to the Setup menu.
The supervisor password
must be enabled before
the user password can be
set.