Using the System Setup Program 4-5
Selecting C: Only causes the system to boot only from the
hard-disk drive, even if there is a bootable diskette in drive A.
You might select the C: Only option to prevent an unautho-
rized person from accessing the system by booting from a
diskette.
Boot Options Submenu Categories
To access the Boot Options submenu (see Figure 4-2),
highlight the Boot Sequence category in the Main menu
and press <Enter>.
Figure 4-2. Boot Options Submenu
Boot Options
Boot Sequence: [A: then C:]
SETUP Prompt: [Enabled]
POST Errors: [Enabled]
Keyboard Errors: [Enabled]
Diskette Drive Check: [Enabled]
Reset Button: [Enabled]
Item-Specific Help
BIOS Version: A
XX
Determines the order of
drives from which the
system tries to boot.
key functions
F1 Help Select Item -/+ Change Values F9 Setup Defaults
ESC Exit Select Menu Enter Select Submenu F10 Previous Values
Dell System PowerEdge 2200 Setup
Main Advanced Security Exit
To Next Page
Loading...
