Back to Contents Page
Left Side-Panel
Alienware Aurora Service Manual
Removing the Left Side-Panel
Replacing the Left Side-Panel
Removing the Left Side-Panel
1. Follow the instructions in Before You Begin.
2. Slide the latch to unlock the release panel.
3. Lift the release panel to open the left-side panel.
4. Slide and lift the left side-panel.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING: To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
NOTE: Ensure that you remove the security cable from the security cable slot (if applicable).
NOTE: Theater lighting (available only in Alienware Aurora ALX) turns on automatically when the left side-panel is removed.
To Next Page
Loading...
Need help?
General