Replacing the Right-Side Middle Panel
1. Follow the instructions in Before You Begin.
2. Align the right-side middle panel on top of the right-side bottom panel.
3. Replace the two screws that secure the right-side middle panel to the chassis.
4. Replace the lighting board (see Replacing the Lighting Board).
5. Replace the right-side top panel (see Replacing the Right-Side Top Panel).
6. Connect your computer and all attached devices to electrical outlets, and turn them on.
Removing the Right-Side Bottom Panel
1. Follow the instructions in Before You Begin.
2. Remove the hard-drive fan assembly (see Removing the Hard-Drive Fan Assembly).
3. Remove the power-supply cover (see Removing the Power Supply).
4. Disconnect the DC wire harness from the power supply.
5. Remove the right-side top panel (see Removing the Right-Side Top Panel).
6. Remove the two screws that secure the right-side bottom panel to the chassis.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
To Next Page
Loading...
Need help?
General