9. Apply the new thermal grease to the top of the processor.
10. Replace the processor liquid-cooling assembly (see Replacing the Processor Liquid-Cooling Assembly).
11. Replace the left side-panel (see Replacing the Left Side-Panel).
12. Connect your computer and all attached devices to electrical outlets, and then turn them on.
Back to Contents Page
CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a
requirement for optimal processor operation.
CAUTION: Ensure that the processor liquid-cooling assembly is correctly seated and secured.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
To Next Page
Loading...
Need help?
General