Table 8. Secure Boot (continued)
Option Description
Boot Option #1 Displays the available first boot option.
Boot Option #2 Displays the available second boot option.
Boot Option #3 Displays the available third boot option.
Exit
Table 9. Exit
Option Description
Save Changes and Reset Enables you to exit system setup and save your changes.
Discard Changes and Reset Enables you to exit system setup and load previous values for all
system setup options.
Restore Defaults Enables you to restore default values for all system setup options.
Discard Changes Enables you to load previous values for all system setup options.
Save Changes Enables you to save the changes for all system setup options.
System and setup password
Table 10. System and setup password
Password type Description
System password Password that you must enter to log in to your system.
Setup password Password that you must enter to access and make changes to the
BIOS settings of your computer.
You can create a system password and a setup password to secure your computer.
CAUTION: The password features provide a basic level of security for the data on your computer.
CAUTION: Anyone can access the data that is stored on your computer if it is not locked and left unattended.
NOTE: System and setup password feature is disabled.
Assigning a system setup password
Prerequisites
You can assign a new System or Admin Password only when the status is in Not Set.
About this task
To enter the system setup, press F12 immediately after a power-on or reboot.
Steps
1. In the System BIOS or System Setup screen, select Security and press Enter.
The Security screen is displayed.
2. Select System/Admin Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
ā A password can have up to 32 characters.
79
To Next Page
Loading...
Need help?
General