Input Output board
Removing Input Output board
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
c. battery
3. To remove the Input Output board (I/O board):
a. Lift the latch and, disconnect the two I/O cables from the connector on the I/O board [1].
b. Remove the 2 (M2x4) screws that secure the I/O bracket to the system [2].
c. Open the I/O bracket up to 90° backward and release the bracket from the slot on the system [3].
d. Lift the bracket away from the system.
e. Remove the 2 (M2x3) screws that secure the I/O board to the system [1].
f. Lift the I/O board away from the system [2].
Removing and installing components
19
To Next Page
Loading...
