Installing display cable
Steps
1. Affix the adhesive tape to secure the display cable to the display assembly.
2. Route the display cable to its slot in the display assembly.
3. Connect the display cable to the connector on the display assembly and affix the adhesive tape to secure the display cable
to the system.
4. Install the:
a. display panel-touch
b. display assembly
c. battery
d. base cover
e. microSD card
5. Follow the procedure in After working inside your computer.
Camera
Removing camera
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
c. battery
d. display assembly
e. display panel-touch
38
Removing and installing components