3. Affix the rubber cap to secure the eDP cable, WLAN cable and sensor cable inside the display hinge cover.
4. Install the:
a. display assembly
b. battery
c. base cover
d. microSD card
5. Follow the procedure in After working inside your computer.
Display hinges
Removing display hinge
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
c. battery
d. display assembly
e. display panel-touch
3. To remove the display hinge:
a. Remove the 2 (M2x3) screws and 6 (M2.5x2.5) screws that secure the display hinge to the display assembly.
b. Lift the display hinge away from the display assembly.
Removing and installing components
35
To Next Page
Loading...
