151Troubleshooting
• Settings Reset
Network Reset
Use the Network Reset function to restore the print server's network settings, such as password and IP address, back
to its default factory settings.
• Unplug all the interface cables before you perform a Network Reset.
1. Press p or q to select the Reset Menu option, and then press OK.
2. Press p or q to select the Network option, and then press OK.
3. Press p to select Yes.
The machine will restart automatically.
Factory Reset
Use the Factory Reset function to reset certain machine settings back to the original factory settings.
1. Press p or q to select the Reset Menu option, and then press OK.
2. Press p or q to select the Factory Reset option, and then press OK.
3. Press p to select Reset.
Settings Reset
1. Disconnect the network cable from the machine. If you do not, network settings such as IP address will not be
reset.
2. Press p or q to select the Reset Menu option, and then press OK.
3. Press p and Back at the same time.
4. When Settings Reset appears, press OK.
5. When Restart Printer? appears, press OK.
The machine restarts automatically.
To Next Page
Loading...
