Figure 11. Inside the system with liquid cooling module
1.
Handle 2. Power supply unit (PSU 1)
3. Riser 2 4. System board
5. Memory DIMM sockets 6. Liquid cooling module
7. Cooling fan 8. Drive backplane
9. Service tag 10. Cooling fan cage assembly
11. Power supply unit (PSU 2) 12. Intrusion switch module
13. Liquid cooling module tubes
Locating the Express Service Code and Service Tag
The unique Express Service Code and Service Tag are used to identify the system.
The information tag is located on the front of the system that includes system information such as Service Tag, Express
Service Code, Manufacture date, NIC, MAC address, QRL label, and so on. If you have opted for the secure default access
to iDRAC, the Information tag also contains the iDRAC secure default password. If you have opted for iDRAC Quick Sync
System overview
17
To Next Page
Loading...
