Dell EMC Core XC750 - Installing the Rear Drive Module Air Shroud

Figure 37. Removing the rear drive module air shroud
Next steps
1. Replace the rear drive module air shroud.
Installing the rear drive module air shroud
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system
Steps
1. Align the rear drive module air shroud with the rear drive module on the system.
2. Lower the air shroud into the rear drive module until it is firmly seated.
Figure 38. Installing the rear drive module air shroud
44
Installing and removing system components