Dell EMC Core XC750 - Removing a Rear Drive Module Cooling Fan

Figure 42. Installing a cooling fan
Next steps
1. Follow the procedure listed in After working inside your system.
Removing a rear drive module cooling fan
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system
3. Remove the rear drive module air shroud.
Steps
Press the orange release tab and lift the rear drive module cooling fan to disconnect from the connector on the rear drive
module.
WARNING: Ensure not to tilt or rotate the cooling fan while removing from the rear drive module.
48 Installing and removing system components