Dell EMC VMAX 250F - Bottom Routing Model, VMAX 250 F; Bottom Routing Model, VMAX 450 F, VMAX 850 F, VMAX 950 F

Table 36 Bottom routing model, VMAX 250F
Model Description
ES-BOT-KIT Bottom routing kit
VMAX 450F, VMAX 850F, VMAX 950F
The EMC GridRunner
™
bottom routing kit (E-BOT-KIT) and customer-supplied cable
troughs can help organize and protect subfloor cables that connect separated bays.
GridRunners reduce the vertical drop of the dispersion cables, which may increase the
distance between the separated bays.
Each GridRunner supports the cable bundle above the subfloor. GridRunners are
installed with brackets that attach to the stanchions under the raised floor. The
stanchions are up to one inch in diameter, measured at six inches (15.24 cm) below
the raised tiles.
To ensure sufficient support of the cable bundle, a GridRunner should be installed
every two meters.
Table 37 Bottom routing model, VMAX 450F, VMAX 850F, VMAX 950F
Model Description
E-BOT-KIT
a
Bottom routing kit
a.
GridRunner basket for supporting cables beneath the floor for dispersed bays.
Optional kits
GridRunner kit and customer-supplied cable trough 109