Wiring configurations, VMAX 450F, VMAX 850F, VMAX
950F
These wiring configurations are used for the redundant PDU in the complete assembly
(PDU A and PDU B). Each figure represents half of the independent PDU assembly.
The same wiring configurations are used on each PDU.
The PDU AC power cords (single-phase and three-phase) extend 74" (188cm) from
the PDU chassis and are designed to reach to the bay floor egress for connection to
the customer power supply. 15' (4.57m) extension cables are provided.
Power cabling, cords and connectors
68 Site Planning Guide VMAX 250F, VMAX 450F, VMAX 850F, VMAX 950F with HYPERMAX OS
To Next Page
Loading...
