Procedure A: Working with the customer's electrician onsite
Use this procedure if the customer’s electrician is available at the installation site.
This procedure requires three basic tasks that alternate between the customer's
electrician, the EMC CE and back to the customer's electrician.
l
Task 1: Customer's electrician
l
Task 2: EMC Customer Engineer (CE)
l
Task 3: Customer's electrician
Best Practices for AC Power Connections
114 Site Planning Guide VMAX 250F, VMAX 450F, VMAX 850F, VMAX 950F with HYPERMAX OS
To Next Page
Loading...
