6 Installing the Hardware
Installing the Chassis in a Two-Post Rack
3 Attach the bar to the equipment rack brackets using the mounting screws
provided by the rack manufacturer.
Step Task
1 If you are center or rear mounting the chassis in a 19-inch rack, make
sure that the mounting brackets are properly positioned.
If your are mounting the chassis in a 23-inch rack, install the 23-inch
adapters.
2 Using a hand cart, pallet jack, or forklift, align the rack-mount holes
with the equipment rack holes, situating the chassis on top of the
equipment rack shelf bar.
3 Insert rack mounting screws in the holes that are not obscured by the
front shipping cover. Tighten the screws.
4 Loosen and remove the screws attaching the front shipping cover.
Remove the cover.
5 Insert the remaining rack mounting screws and tighten to secure the
chassis in the rack.
Step Task
To Next Page
Loading...
