Defaults Disabled (shutdown)
Command Modes OPENFLOW INSTANCE
Command History
Version 9.1(0.0) Introduced on the S4810 and Z9000.
Usage
Information
Use the no shutdown command to enable the OpenFlow instance. When the no
shutdown
command is used, the OpenFlow instance sends a request to the OpenFlow
controller to establish a connection.
Use the shutdown command to disable an OpenFlow instance. You must use the shutdown
command before making any configuration changes to the OpenFlow instance.
All OpenFlow instances are disabled by default.
Related
Commands
openflow of-instance Create or modify an OpenFlow instance.
controller Configure the controller used by OpenFlow.
36
To Previous Page
Loading...
